Newsletter Signup

<< Back to Comparison Page

Why choose a Brass Plaque?

The definitive statement of excellence – there is nothing that looks more impressive than a high quality, engraved solid brass plaque mounted on a wooden backing plinth. Brass can be engraved in any typestyle and even colour in-filled to faithfully replicate your corporate identity.

Hover above thumbnail to see larger image.

·  Hardwearing and durable meaning that your plaque can be located anywhere, inside or out, and will last forever.

·  Highly polished optimum quality finish - looks professional and prestigious and with the occasional polish will always stay looking its impressive best.

·  Can be engraved with words and logos and can be colour in-filled meaning that we can reproduce and enhance your corporate identity.

Typical applications include solicitors, doctors, financial advisors, accountants, alternative health professions, dentists. In fact anywhere that requires the image of prestige and professionalism.

Why buy from Impact?

We have been producing high quality engraved and laser etched plaques and plates for over 12 years and our staff are trained to the highest standards.

<< Back to Comparison Page

Using our state of the art technology we can make any size or shape of plaque as well as reproduce corporate typestyles and logos. As each job is bespoke, we normally provide individual quotations for you (usually within the hour) for your specific requirements.

However, we have found that most of our customers like to have some 'ball park' idea of prices. We have therefore produced the typical price guide below to give you an idea how competitive our prices are.

The above prices are intended as a guide only, and may alter according to complexity, artwork format, material thickness, size and quantities.

<< Back to Comparison Page

Fixings

	Description goes in here
	Description goes in here
	Description goes in here
	Description goes in here

Wood Swatch

	Description goes in here
	Description goes in here
	Description goes in here
	Description goes in here

Plinths

	Description goes in here
	Description goes in here
	Description goes in here
	Description goes in here
	Description goes in here

<< Back to Comparison Page

       Congratulations. You have chosen the ultimate in prestige. However to keep your solid brass plaque looking good, you will need to folow  the instructions below.

• For light soiling or tarnishing, wipe with methylated spirits Take care that the cloth does not have any grit attached, as this may scratch the plaque. Also ensure that you do not wipe the wooden plinth (if supplied) as this may remove some colour
• For heavy soiling or tarnishing polish with a proprietary cleaner, such as Brasso, again, Take care that the cloth does not have any grit attached, as this may scratch the plaque. Also ensure that you do not wipe the wooden plinth (if supplied) as this may remove some colour.
• This plaque is suitable for indoor or outdoor use. Conditions may vary, but in general indoor plaques should be cleaned once a month and outdoor plaques should be cleaned and polished every week.
• If you notice a build up of polish in the text (or graphic), the best way to clean this is to use a soft cloth, or in the case of small intricate text an old toothbrush is ideal, but brush gently.

1. Remove domes – simply unscrew by hand. We do not screw them tightly, however if they are too tight, wearing rubber gloves for extra grip will help enormously.
2. Remove screws with a flathead screwdriver and lift plaque away from wooden plinth.      
3. You will now see the pre-drilled fixing holes on the wooden plinth. Use the plinth as a template and mark drilling points on the wall. Drill and insert raw plugs. Hold the plaque against the wall, line up with the raw plugs and screw firmly to the wall.
4. Now hold the engraved plaque against the wooden plinth. Line up the holes and screw firmly to the plinth.      
5. Finally, replace the domed caps, hand tight, no tools required.

<< Back to Comparison Page