Flat Cut Stainless Steel Letters - polished Stainless Steel letters with stud fixings

Flat Cut Stainless Steel Letters

The ultimate in prestige and professionalism. Available in either brushed (satin) finish or Polished (mirror) finish. Shatter proof, will not rust, rot or corrode. Will never fade or tarnish. Can also be powder coated to any standard RAL colour Any typestyle or logo can be recreated. They can be

Why Choose Flat Cut Stainless Steel Letters?

Stainless steel is a product that instantly suggests professionalism and prestige. When it comes to superior quality lettering, which is suitable for interior and exterior use, nothing beats it.

Stainless Steel letters and logos can be cut to any size, shape or typeface for interior and exterior use. They can be created with a brushed satin or polished mirror finish. Impact Signs can also powder coat stainless steel in any RAL colour to replicate your corporate image.

Stainless Steel is a popular material, as it is durable, shatterproof and weather proof. Unlike other metals, it doesn’t rust, corrode, tarnish or fade. We can install your stainless steel letters flush mounted or raised ¾ inch/20mm from the wall. With either option, hidden rear fixings will ensure nothing compromises the finished effect.

Impact Signs have installed stainless steel letters on art galleries, boutiques, offices and commercial properties. If you are looking for a top quality product, look no further.

Not quite sure what you want?

We’re more than happy to discuss your requirements and provide advice without obligation. Simply select your preferred method to get in touch.

Process

It’s as easy as 123

Let’s get started with your Ideas, the more detail you provide the better!
We’ll email or phone you to talk it through, give advice and provide a quote.
It’s then over to us to create and amend artwork and you to pay the deposit.
If you provide the artwork, we’ll pre-flight check it for you and you pay the deposit
With your approval, we’ll get cracking on with the production.
We’ll soon be back in touch to arrange fitting/delivery/collection.
We will never proceed with production until you are entirely happy with the artwork and will always provide a proof (unless the artwork is supplied by you).

Colour Swatches

This product is available in the following colours.

Stainless Steel letters are normally produced with a satin (brushed) finish or highly polished (like chrome).

They can also be powder to standard ral colours as below.

Disclaimer: Although every effort has been made to display the colour swatches shown as true, all monitors are not consistent in colour representation, the swatches therefore should be taken only as a guide!

Maintenance

Care of your new rigid letters

Congratulations, you have just bought ‘the best’. Impact Signs use ‘new generation’ materials for all of their fascia signs. Everything that we use is…

  • UV stable (fade resistant).
  • Waterproof.
  • Rot proof
  • Virtually maintenance free.
  • All you have to do is clean with soapy water and a sponge as required. That’s it!

Lighting

Add Lighting and Get Noticed

Enhances any sign and gives higher visibility especially at night.

With an attractive curved profile housing a unique polished aluminium reflector, it is the answer for a constant run illumination of signs, fascias, pelmets and skirtings. Adjustable stand-off brackets allow accurate adjustment of light throw of signs up to 3000mm depth. The aluminium body is available in silver anodised and powder coated white finish. Sections can be butt-jointed with available adaptors.

Features & Benefits: Powder coated white or black as standard but can be to any RAL colour, waterproof, rot proof, maintenance free (tubes are easily changed).

DIY

  1. When we supply you with individual cut letters, we also supply a “Fixing Layout” made from craft paper, showing the drawn round letters (in a layout) with the “Fixing” points marked with an “X”, this is indicated at the top of the page, – X marks the spot!
  2. You place the “Layout” at the required position on the fascia and drill where the “X’s” are!
  3. The female cap is then screwed into the fascia (Giving the screw half a turn back to allow the cup to swivel and screw down)
  4. Push the letter into the cups until and audible click is heard if using nylon fittings, for metal letters using brass fixings screw down the cap until it is tight.

It’s as easy as that!

Note: for metal letters, we would use brass screw type locators, exactly the same fixing method as above but instead of ‘snapping’ in place you simply screw the nut to to the thread on the letter.

Video

Testimonials

I see the signs were replaced over the weekend. Thank you very much for sorting so quickly! Kind Regards

Steve BlundenLanza

Hi Phil, We were very happy with the sign that you have sent us. We require two more signs please

Lucy KingLocal Car and Van Rental